Motor Mount Bracket for N20 Motor 3PI miniQ

The Motor Mount Bracket for N20 Motor holds an N20 micro gear motor securely on a robot chassis, PCB or project panel. It is made for small robot platforms such as 3PI and miniQ line-following cars, where each motor must sit square to the chassis so the wheels track straight. A firm mount also stops the motor from twisting under load and takes strain off its solder tabs and wires.

Motor Mount Bracket for N20 Motor Specifications

• Fits: N20 micro gear motors with the standard 12 × 10 mm gearbox
• Compatible platforms: 3PI and miniQ style robot cars and similar small chassis
• Mounting: fixes to the chassis with screws through the bracket holes
• Use: one bracket per motor; motor and wheel sold separately

Motor Mount Bracket for N20 Motor Applications

• Mounting the drive motors of 3PI and miniQ robot cars
• Line-follower, maze-solving and mini sumo robots
• Small 3D-printed, acrylic or PCB robot chassis
• Compact mechanisms such as turntables, small pumps and model drives

What's in the Box

• 1 × N20 motor mount bracket

Tip: A two-wheel robot needs two brackets, one for each motor. Tighten the screws evenly so the motor shaft sits square to the chassis, and turn the wheel by hand to check it runs freely before powering the motor.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.