16 Bit WS2812 5050 RGB LED Built-in Full-Color Driving Lights

The 16 Bit WS2812 5050 RGB LED board carries 16 WS2812 full-colour LEDs in 5050 packages, each with its driver chip built in. That means you can set the colour and brightness of all 16 LEDs one by one from a single data pin on an Arduino, ESP32, ESP8266 or Raspberry Pi. It is a small, low-cost way to add colourful indicators and animations to a project.

16 Bit WS2812 5050 RGB LED Specifications

• LEDs: 16 × WS2812 RGB, 5050 size
• Driver: built into every LED, so each one is individually addressable
• Supply voltage: 5 V DC, the usual supply for WS2812 boards
• Control: single-wire serial data at 800 kbps, data out for chaining
• Colour depth: 256 levels per colour, about 16.7 million colours
• Current: up to about 60 mA per LED at full white, about 1 A in total

16 Bit WS2812 5050 RGB LED Applications

• Status and notification lights
• Small lamps, night lights and decorations
• Learning addressable LEDs with Arduino
• Indicators for robots, smart home devices and games

What's in the Box

• 1 × 16-LED WS2812 5050 RGB LED board

Tip: Use a 5 V supply that can deliver at least 1 A, and connect the board's ground to your microcontroller's ground. Add a 330 Ω resistor in the data line and start with low brightness in the Adafruit NeoPixel or FastLED library.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.