9G Servo Manipulator Mechanical Arm Acrylic Claws

The 9G servo manipulator Mechanical Arm Acrylic Claws is an acrylic gripper kit that turns a 9 g micro servo into a working claw. When the servo turns, the claw opens and closes, so a robot arm, smart car or Arduino project can grab and lift small, light objects. It is a low-cost way to add a gripper to your own robot and learn servo control.

Mechanical Arm Acrylic Claws Specifications

• Type: robot gripper (claw) kit
• Material: acrylic
• Drive: 9 g micro servo, such as the SG90 or MG90S
• Control: servo PWM signal from an Arduino, ESP32, micro:bit or servo driver board
• Assembly: required

Mechanical Arm Acrylic Claws Applications

• End gripper for DIY robot arms
• Grabbing robots and smart cars
• Arduino and ESP32 servo control lessons
• Pick-and-place demonstrations with light objects
• STEM classes and robotics clubs

What's in the Box

• 1 × acrylic claw kit for a 9 g servo

Tip: Set the servo to its centre position (90°) before attaching the horn, then find the fully open and closed angles in your code so the servo does not stall against the jaws, which makes it hot and draws high current. Power servos from a separate 5 V supply rather than the Arduino 5 V pin.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.