BNC to Hook Cable 1.5m

The BNC to Hook Cable is a 1.5 m test lead with a BNC plug on one end and hook clips on the other. It connects the BNC socket of an oscilloscope, function generator or other signal source directly to component leads, test points and breadboard wires, without needing a separate probe. It is a handy lead for electronics labs, repair benches and student experiments.

BNC to Hook Cable Specifications

• Connector A: BNC plug, fits the BNC sockets on test equipment
• Connector B: hook test clips for signal and ground
• Length: 1.5 m
• Cable: coaxial lead from the BNC end
• Best for: low-frequency signal measurement and injection

BNC to Hook Cable Applications

• Feeding a function generator signal into a breadboard circuit
• Quick oscilloscope measurements on audio and low-frequency circuits
• Connecting a signal source to an amplifier or filter under test
• University and school electronics labs

What's in the Box

• 1 × BNC to hook cable, 1.5 m

Tip: Use a continuity test to check which clip goes to the BNC centre pin (signal) and which to the shell (ground). On most oscilloscopes the ground clip is tied to mains earth, so never attach it to a mains-referenced point.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.