Hantek TO1154D Touch Screen Digital Oscilloscope 4CH 150MHz 1GSa/s + 25MHz Signal Source (EU Plug)

The Hantek TO1154D is a touch screen digital oscilloscope with 4 channels, 150 MHz bandwidth and a 1 GSa/s sample rate, plus a built-in 25 MHz signal source. Having a scope and a signal generator in one unit lets you feed a test signal into a circuit and watch its response on the same screen, which suits electronics labs, repair benches and engineering classes.

Hantek TO1154D Specifications

• Channels: 4 analog input channels
• Bandwidth: 150 MHz
• Sample rate: 1 GSa/s
• Signal source: built-in, up to 25 MHz
• Operation: touch screen
• Power: mains, EU plug

Hantek TO1154D Applications

• Debugging digital, analog and power circuits
• Comparing up to four signals at once, such as clocks, data lines and supply rails
• Testing filters and amplifiers with the built-in signal source
• Electronics repair and maintenance
• University labs and technical training

What's in the Box

• 1 × Hantek TO1154D oscilloscope (accessories as supplied by Hantek)

Tip: Set the probe switch and the channel's probe setting to the same ratio, for example ×10, so voltage readings are correct, and compensate each probe on the calibration output before measuring. Never connect a probe ground clip to a point that is not at ground potential, such as mains live, without an isolated or differential probe.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.