Heat Shrink Green-1mm Roll 1m

The Heat Shrink Green-1mm roll gives you 1 m of green heat shrink tubing with a 1 mm diameter. Slide it over a joint, heat it, and it shrinks tightly around the wire to insulate and protect it. The small size is made for thin wires such as jumper wires, sensor leads, LED legs and small connector pins, and the green colour helps you mark and identify circuits.

Heat Shrink Green-1mm Specifications

• Diameter: 1 mm (before shrinking)
• Length: 1 m
• Colour: green
• Type: heat shrink tubing, cut to any length
• Shrinks with: a heat gun or hot air station

Heat Shrink Green-1mm Applications

• Insulating soldered joints on thin wires
• Covering LED legs and resistor leads
• Protecting Dupont and sensor cable ends
• Colour-coding and labelling wires in a harness
• Small repairs on headphone, charger and signal cables

What's in the Box

• 1 × 1 m length of 1 mm green heat shrink tubing

Tip: Slide the tubing onto the wire before soldering, then move it over the joint once it has cooled. Heat it evenly with a heat gun rather than a lighter flame, which can burn the tubing and the wire insulation.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.