Heat Shrink Roll 200m d: 2mm, Color: Green

The Heat Shrink Roll 200m d: 2mm is green heat shrink tubing with a 2 mm diameter, supplied from a 200 m roll. Slide it over a wire or solder joint, apply heat, and it shrinks tightly around it to insulate and protect the connection. The small 2 mm size suits thin signal wires, jumper leads, sensor cables and the legs of small components.

Heat Shrink Roll 200m d: 2mm Specifications

• Diameter: 2 mm (before shrinking)
• Colour: green
• Roll length: 200 m
• Use: insulating and protecting thin wires, joints and component leads
• Cutting: cut to any length with scissors or a cutter

Heat Shrink Roll 200m d: 2mm Applications

• Insulating soldered joints on thin wires
• Covering header pins and Dupont connector ends
• Colour-coding wires in control panels, robots and Arduino builds
• Protecting LED and resistor legs from short circuits
• Tidying small cable ends and sensor leads

What's in the Box

• Green 2 mm heat shrink tubing from a 200 m roll

Tip: Slide the tube onto the wire before soldering, then move it over the joint once it has cooled. Shrink it with a heat gun or hot-air station rather than an open flame, and pick a tube slightly larger than the wire so it slides on easily.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.