Heat Shrink Tubing 2.5mm Black 1 Meter

The Heat Shrink Tubing 2.5mm Black is sold as a 1 meter length of black tube with a 2.5 mm diameter. Slide a piece over a solder joint or splice, warm it with a heat gun, and it shrinks tightly around the wires to insulate and protect them. The small size is a good fit for thin hookup wire, jumper wires and sensor leads.

Heat Shrink Tubing 2.5mm Black Specifications

• Diameter: 2.5 mm (before shrinking)
• Length: 1 meter, cut to the size you need
• Colour: black
• Activation: shrinks when heated with a heat gun or hot air station
• Use: electrical insulation and strain relief for wires and joints

Heat Shrink Tubing 2.5mm Black Applications

• Insulating soldered wire joints and splices
• Covering the legs of LEDs, resistors and sensor leads
• Tidying jumper wires and servo extension cables
• Repairing damaged wire insulation
• Robotics, drone and Arduino project wiring

What's in the Box

• 1 × 1 meter of 2.5 mm black heat shrink tubing

Tip: Slide the tubing onto the wire before you solder the joint, and cut each piece about 1 cm longer than the bare area. Use a heat gun rather than an open flame for an even shrink without burning the tube.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.