Heat Shrink Tubing 2mm Black 1 Meter

The Heat Shrink Tubing 2mm Black is a 1 meter length of black tubing with a 2 mm diameter that shrinks tightly around a joint when you heat it. This small size is made for insulating thin wires, single solder joints and component legs, giving a neat, professional finish without electrical tape. Cut it to the length you need for each joint.

Heat Shrink Tubing 2mm Black Specifications

• Diameter: 2 mm (size before shrinking)
• Colour: black
• Length: 1 meter, cut to size
• Activation: shrinks in diameter when heated with a heat gun or hot air
• Use: electrical insulation, strain relief and protection of joints

Heat Shrink Tubing 2mm Black Applications

• Insulating soldered joints on thin hookup and jumper wires
• Covering LED, resistor and sensor legs to prevent short circuits
• Tidying wiring in Arduino, ESP32 and robotics projects
• Marking ground or negative wires with a black sleeve

What's in the Box

• 1 × 1 meter black heat shrink tube, 2 mm

Tip: Slide a piece of tubing onto the wire before you solder, then move it over the cooled joint and heat it evenly with a heat gun. Avoid using a lighter flame, which can burn the tubing and the wire insulation.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.