NodeMcu Lua WIFI V2 Internet Development Board Based on ESP8266 CP2102 + 30PIN + Type C

The NodeMcu Lua WIFI V2 is an ESP8266 Wi-Fi development board with a CP2102 USB-to-serial chip, 30 pins and a USB Type-C port. Plug it into a computer with a USB-C cable to power and program it, then connect sensors, relays and displays to build IoT devices that join your Wi-Fi network. It works with the Arduino IDE, the NodeMCU Lua firmware and MicroPython.

NodeMcu Lua WIFI V2 Specifications

• Chip: ESP8266, 32-bit, 80 MHz (up to 160 MHz)
• Wi-Fi: 802.11 b/g/n, 2.4 GHz
• USB-to-serial chip: CP2102
• USB connector: USB Type-C
• Pins: 30 header pins, including GPIO with PWM, I2C, SPI and UART, and one analog input (A0)
• Logic level: 3.3 V
• Power: 5 V through USB-C or the VIN pin
• Programming: Arduino IDE (ESP8266 core), Lua, MicroPython

NodeMcu Lua WIFI V2 Applications

• Wi-Fi relays, smart plugs and home automation
• Sending sensor readings to Google Sheets, MQTT brokers or cloud dashboards
• Small web servers for controlling devices from a phone
• IoT courses, STEM labs and university projects

What's in the Box

• 1 × NodeMCU V2 ESP8266 development board (CP2102, 30-pin, USB Type-C)

Tip: If the computer does not detect the board, install the Silicon Labs CP210x USB driver and use a USB-C cable that carries data, not a charge-only cable. The GPIO pins work at 3.3 V, so use a level shifter or a voltage divider for 5 V signals.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.