Solder Wire 0.6mm 63%

The Solder Wire 0.6mm 63% is a 0.6 mm tin-lead solder wire made of 63% tin and 37% lead (Sn63/Pb37). This eutectic alloy melts at a single temperature of 183 °C, so it flows quickly and sets cleanly for bright, reliable joints. The 0.6 mm diameter sits between fine and general-purpose solder, so it handles small SMD parts as well as header pins and through-hole components.

Solder Wire 0.6mm 63% Specifications

• Alloy: Sn63/Pb37 (63% tin, 37% lead)
• Melting point: 183 °C (eutectic)
• Diameter: 0.6 mm
• Use: electronics soldering with a soldering iron or station

Solder Wire 0.6mm 63% Applications

• Soldering header pins on Arduino, ESP32 and sensor modules
• Through-hole resistors, capacitors and ICs on PCBs and perfboards
• Small SMD parts and fine-pitch repairs
• Tinning wires, connectors and cable joints
• Electronics workshops, school labs and repair benches

What's in the Box

• 1 × pack of 0.6 mm Sn63/Pb37 solder wire

Tip: Heat the pad and the component lead together with a clean, tinned iron tip, then feed the solder into the joint rather than onto the tip. This solder contains lead, so work in a ventilated area, do not eat or drink while soldering and wash your hands afterwards.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.