Tactile Push Button Switch 6x6x5

The Tactile Push Button Switch 6x6x5 is a small momentary switch with a 6 × 6 mm body and a height of 5 mm. It closes the circuit only while you press it and springs back with a light click when released. This is the classic button used in Arduino starter kits, on development boards and on custom PCBs for reset, input and menu controls.

Tactile Push Button Switch 6x6x5 Specifications

• Dimensions: 6 × 6 × 5 mm
• Action: momentary, normally open (closes only while pressed)
• Pins: 4, joined internally in two pairs
• Mounting: through-hole, fits breadboards, perfboards and PCBs
• Use: low-voltage, low-current signal circuits

Tactile Push Button Switch 6x6x5 Applications

• Digital inputs for Arduino, ESP32 and Raspberry Pi projects
• Reset and boot buttons on custom PCBs
• Keypads, game controllers and menu navigation
• Electronics classes and STEM kits

What's in the Box

• 1 × 6 × 6 × 5 mm tactile push button switch

Tip: Place the button across the centre channel of a breadboard so each pair of legs sits on a different side. Use INPUT_PULLUP in your Arduino code, or add a 10 kΩ pull-down resistor, so the input never floats.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.