High Power Robot Smart Car Motor Driver BTS7960

The High Power Robot Smart Car Motor Driver BTS7960 is an H-bridge module for robots and other projects with large DC motors. Two BTS7960 half-bridge chips form a full H-bridge, so one module drives a single DC motor forward and backward with PWM speed control, at currents far beyond small drivers such as the L298N. It connects directly to Arduino, ESP32 and Raspberry Pi logic pins.

Motor Driver BTS7960 Specifications

• Driver chips: 2 × BTS7960 half-bridges forming a full H-bridge
• Motor channels: 1 brushed DC motor, forward and reverse
• Motor supply: 6–27 V DC
• Peak current: up to 43 A (BTS7960 current limit)
• Logic input: 3.3–5 V, PWM up to 25 kHz
• Control pins: RPWM, LPWM, R_EN, L_EN, R_IS, L_IS, VCC, GND
• Protection: over-temperature shutdown, current limiting and undervoltage shutdown built into the chips
• Cooling: on-board heatsink

Motor Driver BTS7960 Applications

• Large robot cars and rovers with high-torque DC motors
• Electric ride-on toys, carts and conveyor projects
• Linear actuators, winches and lifting mechanisms
• Competition robots that need fast, strong motor control

What's in the Box

• 1 × BTS7960 high-power motor driver module

Tip: Tie R_EN and L_EN HIGH to enable the bridge, then send PWM to RPWM for one direction or LPWM for the other, never both at once. Use thick wires and a fused supply for the motor, and connect the module GND to your microcontroller GND.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.