Fan 6x6cm 5V

The Fan 6x6cm 5V is a 60 × 60 mm DC cooling fan that runs from a 5 V supply. It pushes air across heat sinks and warm components to keep them at safe temperatures, and because it runs on 5 V it can share the same supply as a Raspberry Pi, an Arduino project or a USB power source. Its square frame fits project boxes, small enclosures and 3D printer electronics.

Fan 6x6cm 5V Specifications

• Size: 60 × 60 mm (6 × 6 cm) square frame
• Rated voltage: 5 V DC
• Type: axial cooling fan with a brushless DC motor
• Mounting: 4 corner holes for screws
• Connection: wire leads to the 5 V supply

Fan 6x6cm 5V Applications

• Cooling Raspberry Pi and other single-board computer cases
• Ventilating electronics enclosures and control boxes
• Cooling heat sinks on voltage regulators, MOSFETs and motor drivers
• Airflow for 3D printer and CNC controller electronics
• Small chargers, power supplies and USB-powered projects

What's in the Box

• 1 × 60 × 60 mm 5 V DC fan

Tip: Connect the positive lead (usually red) to +5 V and the negative lead (usually black) to ground, because a DC fan will not spin if the polarity is reversed. To switch it on and off from an Arduino or ESP32, use a transistor or MOSFET, as a microcontroller pin cannot supply the fan current directly.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.