Beirut ElectroCity
Resistor 0.25W 3.3M ohm (10 pcs)
Part no. 10253267
- Pick up in Msaitbeh, Beirut
- Delivery across Lebanon
- Bulk and education pricing on request
Description
The Resistor 0.25W 3.3M ohm is a through-hole fixed resistor with a resistance of 3.3 MΩ and a power rating of 0.25 W, sold in a pack of 10. The 3.3 MΩ value is common in capacitor bleeder networks, touch sensing and amplifier feedback, and it draws only about 1.5 µA from a 5 V supply.
Resistor 0.25W 3.3M ohm Specifications
- Resistance: 3.3 MΩ (3,300,000 ohms)
- Power rating: 0.25 W (1/4 W)
- Type: fixed resistor, axial leads, through-hole
- Standard value: E24 series
- Current at 5 V: about 1.52 µA (I = V / R)
- Fits: breadboards, perfboards and PCBs
- Pack size: 10 pieces
Resistor 0.25W 3.3M ohm Applications
- Bleeder resistors that discharge filter capacitors after power-off
- Capacitive touch and proximity sensing with the Arduino CapacitiveSensor library
- High-gain feedback resistors in op-amp and sensor amplifier circuits
- Very low-drain voltage dividers for battery and supply monitoring
- Electronics education and prototyping
What's in the Box
- 10 × 3.3 MΩ 0.25 W resistors
Tip: When checking it with a multimeter, do not hold both leads with your fingers, because your body resistance in parallel makes the reading lower than 3.3 MΩ. At this value the 0.25 W limit is only reached at about 910 V, so the resistor's maximum working voltage, not its power rating, is the real limit; check it before using the resistor across high voltages.
Shipping & pickup
Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.