Resistor 0.25W 560K ohm (10 pcs)

The Resistor 0.25W 560K ohm is a through-hole fixed resistor with a resistance of 560 kΩ and a power rating of 0.25 W, sold in a pack of 10. It is a good value for ESP32 and Arduino battery-sense dividers, MOSFET gate pull-downs and timing circuits where low current matters.

Resistor 0.25W 560K ohm Specifications

• Resistance: 560 kΩ (560,000 ohms)
• Power rating: 0.25 W (1/4 W)
• Type: fixed resistor, axial leads, through-hole
• Standard value: E24 series
• Current at 5 V: about 8.93 µA (I = V / R)
• Fits: breadboards, perfboards and PCBs
• Pack size: 10 pieces

Resistor 0.25W 560K ohm Applications

• High-impedance voltage dividers for reading battery voltage on an Arduino or ESP32 ADC
• Gate pull-down resistors that keep a MOSFET off when the driver pin floats
• Timing resistors in 555 timer and RC delay circuits
• Gain-setting and feedback resistors in op-amp circuits
• Electronics education and prototyping

What's in the Box

• 10 × 560 kΩ 0.25 W resistors

Tip: In a battery divider for an ESP32 or Arduino, add a 100 nF capacitor from the ADC pin to ground; a high-value divider has a high source impedance and the capacitor keeps readings stable. At 560 kΩ the 0.25 W limit is reached at about 370 V, so the maximum working voltage is the limit to check for high-voltage use.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.