Resistor 0.25W 8.2M Ohm (10 pcs)

The Resistor 0.25W 8.2M Ohm is a high-value through-hole resistor of 8.2 MΩ with a 0.25 W power rating, sold in a pack of 10. Connected across a 12 V battery it draws only about 1.5 µA, so it is a good choice for always-on monitoring circuits, bleeder paths and inputs that must not be loaded.

Resistor 0.25W 8.2M Ohm Specifications

• Resistance: 8.2 MΩ (8,200,000 ohms, also written 8M2)
• Power rating: 0.25 W (1/4 W)
• Type: fixed resistor, axial leads, through-hole
• Colour code: grey, red, green (4-band) or grey, red, black, yellow (5-band), followed by the tolerance band
• Current at 12 V: about 1.5 µA
• Pack size: 10 pieces

Resistor 0.25W 8.2M Ohm Applications

• Battery voltage monitors with very low standby drain
• Bleeder resistors that discharge capacitors after power-off
• Input bias for high-impedance amplifier stages
• Capacitive touch and proximity sensors with Arduino
• Long time-constant RC circuits

What's in the Box

• 10 × 8.2 MΩ 0.25 W resistors

Tip: Keep the board clean and dry. Flux residue, dust and moisture can leak a current comparable to the tiny current through a megaohm resistor, so clean off flux with isopropyl alcohol after soldering.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.