Resistor 0.5W 1.1M ohm (5 pcs)

The Resistor 0.5W 1.1M ohm is a fixed through-hole resistor with a resistance of 1.1 MΩ and a power rating of 0.5 W, sold in a pack of 5. It is a standard E24 value just above 1 MΩ, used for touch sensing, discharging capacitors and high-impedance circuits that need very low current.

Resistor 0.5W 1.1M ohm Specifications

• Resistance: 1.1 MΩ (1,100,000 ohms)
• Power rating: 0.5 W (1/2 W)
• Current at 5 V: about 4.55 µA
• RC time constant with 1 µF: about 1.1 s
• Type: fixed resistor, axial leads, through-hole
• Fits: breadboards, perfboards and PCBs
• Pack size: 5 pieces

Resistor 0.5W 1.1M ohm Applications

• Touch buttons with the Arduino CapacitiveSensor library
• Bleeder resistors across power supply capacitors
• Low-drain voltage dividers and high-value pull-downs
• Op-amp feedback and bias networks
• RC timing circuits

What's in the Box

• 5 × 1.1 MΩ 0.5 W resistors

Tip: When a divider this high feeds an Arduino analog input, add a 100 nF capacitor from the pin to ground or use an op-amp buffer, since the ATmega328P ADC is designed for source resistances of 10 kΩ or less.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.