Resistor 0.5W 910K ohm (5 pcs)

The Resistor 0.5W 910K ohm is a through-hole fixed resistor with a resistance of 910 kΩ and a power rating of 0.5 W, sold in a pack of 5. 910 kΩ is an E24 series value just below 1 MΩ, used in high-impedance voltage dividers, op-amp feedback networks and RC timing where only a few microamps should flow.

Resistor 0.5W 910K ohm Specifications

• Resistance: 910 kΩ (910,000 ohms)
• Power rating: 0.5 W (1/2 W)
• Colour code: white, brown, yellow (4-band) or white, brown, black, orange (5-band), plus a tolerance band
• Type: fixed resistor, axial leads, through-hole
• Fits: breadboards, perfboards and PCBs
• Pack size: 5 pieces

Resistor 0.5W 910K ohm Applications

• High-value voltage dividers for monitoring battery and supply voltages with low drain
• RC timing: 910 kΩ with 1 µF gives a time constant of about 0.91 seconds
• Feedback and gain resistors in op-amp circuits
• Bias resistors for high-impedance inputs
• Electronics education and prototyping

What's in the Box

• 5 × 910 kΩ 0.5 W resistors

Tip: At 5 V a 910 kΩ resistor passes only about 5.5 µA. When you use it in a divider feeding an ADC, add a small capacitor (for example 100 nF) from the ADC pin to ground so the reading stays stable.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.