1.3" Inch Blue I2C IIC OLED LCD Module 4pin

The 1.3" Inch Blue I2C IIC OLED module is a 128 × 64 pixel monochrome OLED display with a 1.3 inch screen and a 4-pin I2C interface. It has the same resolution as the popular 0.96 inch OLED on a larger screen, so text and graphics are easier to read. Each pixel gives its own light, so no backlight is needed and contrast stays high, and it connects to an Arduino, ESP32, ESP8266 or Raspberry Pi with only two data wires.

1.3" Inch Blue I2C IIC OLED Specifications

• Screen size: 1.3 inch diagonal
• Resolution: 128 × 64 pixels
• Display type: OLED, monochrome, blue
• Driver: SH1106 on most 1.3 inch modules (check your board)
• Interface: I2C (IIC), usual address 0x3C
• Pins: 4 (GND, VCC, SCL, SDA)
• Supply: 3.3–5 V

1.3" Inch Blue I2C IIC OLED Applications

• Showing sensor readings such as temperature, humidity and distance
• Menus and status screens for Arduino and ESP32 projects
• Clocks, timers and small data loggers
• Robots, test tools and portable gadgets
• Electronics classes and STEM projects

What's in the Box

• 1 × 1.3 inch I2C OLED display module (4-pin)

Tip: Most 1.3 inch modules use the SH1106 controller rather than the SSD1306 of the 0.96 inch version: if the image is shifted or shows a noisy strip at the edge, use the U8g2 library with an SH1106 setting. Check the pin order printed on the board before wiring, because some modules start with VCC and others with GND.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.