Dagu Rover 5 Tank Motor Driver Board ROHS

The Dagu Rover 5 Tank Motor Driver board is a motor controller made for the Dagu Rover 5 tracked chassis. It drives the chassis motors through separate H-bridge channels, so each motor can be set to its own speed and direction from an Arduino, ESP32 or Raspberry Pi. It also has current sensing and encoder mixing circuits that make it easier to monitor the motors and read the Rover 5 encoders.

Dagu Rover 5 Tank Motor Driver Specifications

• Channels: 4 motor channels, one per Rover 5 motor
• Driver type: low-resistance FET H-bridges
• Control: PWM speed input and direction input for each channel
• Current sensing: analog current-sense output on each channel
• Encoder mixing: combines the two signals of each quadrature encoder into one interrupt-friendly output
• Designed for: Dagu Rover 5 chassis
• Compliance: RoHS

Dagu Rover 5 Tank Motor Driver Applications

• Driving the Rover 5 tank chassis with 4 encoders
• Four-motor robots and small tracked or wheeled platforms
• Closed-loop speed control with encoder feedback
• Detecting stalled or overloaded motors with the current-sense outputs

What's in the Box

• 1 × Dagu Rover 5 motor driver board

Tip: Power the motors from a separate battery, such as the Rover 5's 6 × AA pack, connect that battery's ground to your microcontroller's ground, and use PWM-capable pins for the speed inputs.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.