IC OP07

The IC OP07 is a precision single operational amplifier known for its very low input offset voltage and low drift. It is a good choice when small DC signals must be amplified accurately, such as thermocouple, strain gauge and other sensor signals, and it uses the same 8-pin layout as the classic 741 op-amp.

IC OP07 Specifications

• Type: single precision op-amp
• Input offset voltage: very low, in the tens of microvolts (typical)
• Supply voltage: ±3 V to ±18 V
• Gain-bandwidth: about 0.6 MHz
• Offset null: pins 1 and 8
• Pinout: 2 IN−, 3 IN+, 4 V−, 6 OUT, 7 V+

IC OP07 Applications

• Amplifying thermocouple, strain gauge and bridge sensor signals
• Precision DC amplifiers and integrators
• Instrumentation and measurement circuits
• Low-frequency active filters
• Upgrading 741-based circuits for better DC accuracy

What's in the Box

• 1 × OP07 op-amp IC

Tip: Place a 100 nF decoupling capacitor close to each supply pin. The OP07 is not a rail-to-rail part, so it works best with a dual supply or with the signal kept well inside the supply rails.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.