Beirut ElectroCity

microphone 9*7mm

Part no. L1: G08-5-9 / L2: - / L3: - (10020845)

$0.60
In stock
  • Pick up in Msaitbeh, Beirut
  • Delivery across Lebanon
  • Bulk and education pricing on request
Description

The Microphone 9*7mm is a small electret condenser microphone capsule, about 9 × 7 mm, for picking up voice and sound in compact electronic projects. It needs only a low DC bias voltage and a resistor to work, and with a simple amplifier it turns sound into a signal that an Arduino, ESP32 or audio circuit can use.

Microphone 9*7mm Specifications

  • Type: electret condenser microphone capsule
  • Size: 9 × 7 mm
  • Terminals: 2 (signal and ground; the ground terminal connects to the metal case)
  • Polarity: polarised, the ground terminal must go to ground
  • Power: DC bias through a load resistor

Microphone 9*7mm Applications

  • Sound detection and clap switches with Arduino or ESP32
  • Voice recording and DIY intercoms
  • Sound level and noise monitoring projects
  • Replacing worn microphones in headsets, toys and small devices
  • Electronics classes on audio signals and amplifiers

What's in the Box

  • 1 × 9 × 7 mm electret microphone capsule

Tip: Connect the terminal joined to the metal case to ground, and feed the other terminal from 3–5 V through a resistor of about 2.2 kΩ. Take the audio signal from that terminal through a 1–10 µF capacitor and amplify it with a transistor or op-amp stage before reading it with a microcontroller.

Shipping & pickup

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.