Servo motor set - DS04-NFC + Wheel (360 Degree)

The Servo motor set - DS04-NFC pairs a DS04-NFC 360 degree continuous rotation servo with a wheel that fits its output shaft. Instead of moving to a fixed angle, this servo turns all the way round, and the control signal sets its speed and direction, which makes it a simple drive motor for small robots that needs no separate motor driver.

Servo motor set - DS04-NFC Specifications

• Model: DS04-NFC
• Rotation: 360 degree continuous
• Control: standard servo PWM signal; a pulse of about 1.5 ms stops it, shorter or longer pulses turn it one way or the other
• Operating voltage: 4.8–6 V
• Torque: about 5.5 kg·cm at 4.8 V
• Connector: 3-wire servo lead (signal, power, ground)
• Wheel: mounts directly on the servo output

Servo motor set - DS04-NFC Applications

• Drive wheels for 2WD robot cars and line followers
• Arduino, ESP32 and micro:bit robotics projects
• Rotating platforms, small conveyors and turntables
• STEM classes and robotics competitions

What's in the Box

• 1 × DS04-NFC 360 degree servo motor
• 1 × wheel

Tip: Power the servo from a separate 5–6 V supply rather than the Arduino 5 V pin, and connect the grounds together. If the wheel creeps at the 1.5 ms stop signal, adjust the pulse width in your code slightly until it stops.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.