Servo Mount Brackets for MG995 and MG996

The Servo Mount Brackets for MG995 and MG996 servos let you fix a standard-size servo motor to a robot frame, a chassis plate or another servo. They hold the servo body firmly so that its output horn can move a joint, a pan-tilt head or a steering linkage, which makes them a common part in robot arms, walking robots and other servo-based Arduino projects.

Servo Mount Brackets Specifications

• Compatible servos: MG995 and MG996 (MG996R)
• Servo size: standard-size servo body, about 40 × 20 mm
• Use: mounting a servo to frames, plates or other brackets
• Fixing: screws through the bracket holes into the frame and servo

Servo Mount Brackets Applications

• Robot arm joints and grippers
• Biped and hexapod walking robots
• Pan-tilt camera and sensor mounts
• Steering and linkages in RC models and robot cars
• STEM robotics classes and competitions

What's in the Box

• 1 × servo mount bracket set for MG995 / MG996 servos (as pictured)

Tip: Tighten the screws evenly so the servo sits square in the bracket, and centre the servo (send it to 90°) before fitting the horn so the joint has its full range in both directions. Power MG995 and MG996 servos from a separate 5–6 V supply that can deliver enough current, not from the Arduino 5 V pin.

Orders placed before 14:00 are ready for pickup the same day. Delivery across Lebanon usually takes 1–3 working days.